8000122 Ian

Order Number : 8000122 Ian
Vessel : Newick Val Trimaran

Deposit Recv'd	Measurements Complete	Layouts Requested	Layouts Posted	Waiting for Approval	Layouts Approved	Order in Production	Order Completed	Customer Advised	Order Shipped
XXXXX

Special Shipping Instructions : None

Sail as Quoted to Customer:

> Performance Mainsail
> 3 Reefs
> 6 Full Battens Pockets
> 6 1590 Batten Holders Included
> Draft Stripe, Telltails, Triple Stitched
> Sailbag
> Aluminum Headboard, Leech line, Cam Cleat
> Radial Patches Head, Clew and Tack
> Sail Slides or slugs included
> Luff = 10.990m, Foot = 4.04m
> Leech: 11.15m
> Flat top dimension 940mm
> Sail Area : 32.38m2
>
> Challenge Palma 9 - Tri Radial

How to Use This Web Based Order Form

Customer Information

=== CUSTOMER BILLING INFORMATION ===

ianthorn17@gmail.com

==== CUSTOMER SHIPPING INFORMATION ===

TBD

First Name        : 
Last Name         : 
Address           : 
City              : 
State/Province    : 
Zip/Postal Code   : 
Country           :

Quote Number :316246763.TXT80
ID :132123321.TXT50

Sail Specifications

The aluminium headboard is 15mm back from the sail luff but that could be smaller if practical.

The existing sail battens are as follows (top batten = No.1, bottom batten No.6)

1. 20x8mm batten with 30x10 end cap - 1145mm long
2. 20x8mm batten with 40x10 end cap - 1605mm long
3. 48x10 batten, tapering to 40x4mm at batten holder - 2185mm long
4. 40 x 16.5mm batten, tapering to 40x6 at batten holder - 2900mm long
5. 24 x 6.7mm batten with 68x14mm end cap - 3375mm long
6. 29.3 x 6.7mm batten with 68x14mm end cap - 3675mm long

	- Mainsail - Newick Val Trimaran	8000122 Ian
M0	Sail Layout	Layout v1
M1	Tack Cut Back (Aft face of Mast to center of tack Pin - A)	45mm (Dynema rope tied tack)	HELP
M2	Tack Cut Up (Top of Boom to Center of tack Pin - B)	45mm (Dynema rope tied tack)	HELP
M3	Clew Cut Up (Top of Boom to Center of Tack Pin - X)	Loose Footed loose	HELP
M4	Clew type (slug, outhaul car or ring with strap)	O ring with 400mm velcrose strap	HELP
M5	Sunbrella clew cover for Furling Mains	na	HELP
M6	Other Offsets		HELP
M7	Headboard	Flat top dimension 940mm	HELP
M8	Leech Line	yes
M9	Foot Line	No
M10	Tack Ring Type	pressed ring	HELP
M11	Tack angle	Sailmaker	HELP
M12	Jack Line	No	HELP
M13	Mast Bend (Luff Round)	Std	HELP
M14	Fractional Rig (Yes, No)	No yes	HELP
M15	Mast - Keel or Deck Stepped?	deck stepped (rotating)
M16	Number of Reefs	3 Reefs	HELP
M17	Intermediate Reefing Diamond Eyes (Yes or No)	No	HELP
M18	Foot Reefing Grommets (next to boom)	N/A	HELP
M19	Reefing Ring Type	No.1 pressed ring, Nos 2 and 3 webbed D ring	HELP
M20	Luff Length (Max Hoist - P)	10.990m Max (Net Finished size day of Delivery)	HELP
M21	Foot Length (Max Foot - E)	4.04m Max (Net Finished size day of Delivery)	HELP
M22	Leech Length (straight line head to clew)	11.15m Net Finished size day of Delivery)	HELP
M23	Bimini to Clear (yes or no)	No	HELP
M24	Foot Round	Sailmaker
M25	Aspect Ratio	Sailmaker	HELP
M26	Vessel Backstay Measurement	no backstay (shrouds only)	HELP
M27	Luff Slides (Part Number)	1590 Batten Holder T slides (various) to fit aluminium ‘C’ track. 40x16x3 flat slide	HELP
M28	Foot Slides (Part Number)	Loose Footed	HELP
M29	Roach Type	Sq Top Sail	HELP
M30	Roach Factor	135%	HELP
M31	MGM	Sailmaker	HELP
M32	MGU	Sailmaker	HELP
M33	Batten Type (Partial or Full)	6 Full	HELP
M34	Include Battens	N/A
M35	Install Nylon Batten Holders	YES 1590 Batten Holder with WC-14.4 (1525-16) 10mm Tread	HELP
M36	Intermediate Sliders	Yes 1 Webbing Loop between each batten A107	HELP
M37	Cloth Weight	Challenge Palma Tec 9 - Tri Radial - Grey
M38	Cut Type	Tri Radial
M39	Sail Area	Sailmaker
M40	Cunningham	No Yes	HELP
M41	Telltails	Yes	HELP
M42	Triple Stitch	Yes
M43	Sail Logo and Color(red, blue or black)	No	HELP
M44	Sail Logo Artwork	N/A
M45	Sail Numbers and Color	Yes (black) 7352	HELP
M46	Draft Stripe and Color(red, blue or black)	Yes Black	HELP
M47	Overhead Leech Line	No
M48	Specialty Sail	No	HELP
M49	Boom Cover	No	HELP
M50	Lazy Bag	No	HELP

Extra Info