| - Mainsail - |
7000218 Jan |
||
| M0 |
Sail Layout |
Layout
v1 |
|
| M1 | Tack Cut Back (Aft face of Mast to center of tack Pin - A) | 70mm |
HELP |
| M2 | Tack Cut Up (Top of Boom to Center of tack Pin - B) | 75mm | HELP |
| M3 | Clew Cut Up (Top of Boom to Center of Tack Pin - X) | Loose Footed |
HELP |
| M4 | Clew type (slug, outhaul car or ring with strap) | Webbed Maxi Ring |
HELP |
| M5 | Sunbrella clew cover for Furling Mains | na | HELP |
| M6 | Other Offsets | |
HELP |
| M7 | Headboard | WF157 |
HELP |
| M8 | Leech Line | yes | |
| M9 |
Foot Line |
No |
|
| M10 | Tack Ring Type | Webbed Maxi Ring |
HELP |
| M11 | Tack angle | Luff, Leech and Foot |
HELP |
| M12 | Jack Line | No | HELP |
| M13 | Mast Bend (Luff Round) | Std |
HELP |
| M14 | Fractional Rig (Yes, No) | No |
HELP |
| M15 |
Mast - Keel or Deck Stepped? |
N/A |
|
| M16 | Number of Reefs | 3 Reefs 1) 7220mm 2) 6240mm 3) 5760mm |
HELP |
| M17 | Intermediate Reefing Diamond Eyes (Yes or No) |
N/A |
HELP |
| M18 | Foot Reefing Grommets (next to boom) | N/A |
HELP |
| M19 | Reefing Ring Type | Webbed Maxi Ring Leech for block Large Floppy Rings for luff See picture |
HELP |
| M20 | Luff Length (Max Hoist - P) | 15.90m Max (15.741m Net Finished size day of Delivery) |
HELP |
| M21 | Foot Length (Max Foot - E) | 7.37m Max (Net Finished size day of Delivery) |
HELP |
| M22 |
Leech Length (straight line
head to clew) |
16.96m Max (7.29m Net Finished size day of Delivery) |
HELP |
| M23 |
Bimini to Clear (yes or no) |
HELP | |
| M24 |
Foot Round |
Sailmaker |
|
| M25 |
Aspect Ratio |
Sailmaker | HELP |
| M26 | Vessel Backstay Measurement | N/A |
HELP |
| M27 | Luff Slides (Part Number) | Harken System |
HELP |
| M28 | Foot Slides (Part Number) | Loose Footed |
HELP |
| M29 | Roach Type | Cruise |
HELP |
| M30 | Roach Factor | 1.40 ~ 88m2 |
HELP |
| M31 | MGM | Sailmaker |
HELP |
| M32 | MGU | Sailmaker |
HELP |
| M33 | Batten Type (Partial or Full) | 6 Full |
HELP |
| M34 |
Include Battens |
N/A |
|
| M35 | Install Nylon Batten Holders | N/A |
HELP |
| M36 | Intermediate Sliders | 5 intermediate bungee cord |
HELP |
| M37 | Cloth Weight | 10.88oz Contender Pro Warp |
|
| M38 | Cut Type | Tri Radial |
|
| M39 | Sail Area | ~88m2 |
|
| M40 | Cunningham | No |
HELP |
| M41 | Telltails | Yes |
HELP |
| M42 | Triple Stitch | Yes |
|
| M43 | Sail Logo and Color(red, blue or black) | No |
HELP |
| M44 | Sail Logo Artwork | N/A |
|
| M45 | Sail Numbers and Color | No |
HELP |
| M46 | Draft Stripe and Color(red, blue or black) | Yes (RED) |
HELP |
| M47 |
Overhead Leech Line |
No |
|
| M48 |
Specialty Sail |
No |
HELP |
| M49 |
Boom Cover |
No |
HELP |
| M50 |
Lazy Bag |
No |
HELP |
| - Headsail - |
7000218 Jan |
||
| H0 |
Sail Layout |
Layout
v0 |
|
| H1 | Size of Headsail (110, 135, 150 etc.)" | Luff, Leech and Foot Self Tacking |
HELP |
| H2 | Luff Length, Max Hoist, B measurement | 14.84m webbing loop tip to webbing loop tip (Max) (14.691m Net Finished size day of delivery) |
HELP |
| H3 | Leech Length | 13.46m | HELP |
| H4 | Foot Length | 4.04m |
HELP |
| H5 | Tack and Head Fittings | Webbing Loops |
|
| H6 | Clew Type (Press ring or 0-Ring) | 5 whole Clew board Self Tacking |
HELP |
| H7 |
Leech Line |
Yes |
|
| H8 |
Reefs for Hank on Sail (specify Qty of
tiedowns) |
No Manual Reefs |
|
| H9 |
Foot Line |
Yes |
|
| H10 | Track 1 (Tack to Genoa Track Beginning) | N/A |
HELP |
| H11 | Track 2 (Tack to Genoa Track Ending) | 4.75m Tack to self tacking track Track is 3.36m long |
HELP |
| H12 | Vessel "I" Measurement | 14.27m |
HELP |
| H13 | Vessel "J" Measurement | 4.97m | HELP |
| H14 |
Calculated Forestay Length |
Sailmaker |
|
| H15 | Reef | N/A |
|
| H16 | LP | Sailmaker | HELP |
| H17 | Color of Suncover | Grey | HELP |
| H18 | Side of Sail for Suncover (port or Stbd) | starboard | |
| H19 | Luff Tape Size (such as #6) | 5.5mm | HELP |
| H20 | Furler Manufacturer | ProFurl | |
| H21 | Foam Luff | YES |
HELP |
| H22 | Cut Type | Tri Radial | |
| H23 | Sail Area | Sailmaker |
|
| H24 | Telltails | Yes | HELP |
| H25 | Telltail Window | No |
|
| H26 | Triple Stitch | YES | |
| H27 | Logo | No |
HELP |
| H28 | Cloth Weight | 10.88oz Contender Pro Warp - Tri Radial |
|
| H29 | Sail Numbers and Color (red, blue or black) | No |
HELP |
| H30 | Sheeting Stripe (red, blue, black) | No |
HELP |
| H31 | Draft Stripe Color (red, blue or black) | Yes (RED) |
HELP |
| H32 | Clew Height off Deck | sailmaker |
HELP |
| H33 | Tack Height off Deck | 472mm |
HELP |
| H34 |
Luff tape starts 1030mm up
from Tack |
1030mm |
HELP |
| H35 |
Specialty Sail |
No |
HELP |
| Customer Note: All details we can check as
sailmakers are based on accurate vessel I and J
Measurements |
HELP |
Extra Info
