| Deposit Recv'd |
Measurements Complete |
Layouts Requested |
Layouts Posted |
Waiting for Approval |
Layouts Approved |
Order in Production |
Order Completed |
Customer Advised |
Order Shipped |
| XXXXX |
How to Use This Web Based Order Form
demeoantoine@gmail.com==== CUSTOMER SHIPPING INFORMATION ===
| - Mainsail - 8001029
Antoine |
Beneteau First 310 |
||
| M0 |
Sail Layout |
Layout
v1 |
|
| M1 | Tack Cut Back (Aft face of Mast to center of tack Pin - A) | 50mm |
HELP |
| M2 | Tack Cut Up (Top of Boom to Center of tack Pin - B) | 40mm |
HELP |
| M3 | Clew Cut Up (Top of Boom to Center of Tack Pin - X) | Clew Slug B102 | HELP |
| M4 | Clew type (slug, outhaul car or ring with strap) | O-Ring with Clew Slug B102 | HELP |
| M5 | Sunbrella clew cover for Furling Mains | na | HELP |
| M6 | Other Offsets | |
HELP |
| M7 | Headboard | No Headboard but Webbed O-Ring with Slug B309 | HELP |
| M8 | Leech Line | yes | |
| M9 |
Foot Line |
No |
|
| M10 | Tack Ring Type | Webbed Tack O-Ring | HELP |
| M11 | Tack angle | 88.5 | HELP |
| M12 | Jack Line | No | HELP |
| M13 | Mast Bend (Luff Round) | Mast Bend : Light Wind : 4cm ; Medium Wind : 7cm ; Brisk Wind : 12cm | HELP |
| M14 | Fractional Rig (Yes, No) | No |
HELP |
| M15 |
Mast - Keel or Deck Stepped? |
Deck Stepped Mast type Z Spars Z401 | |
| M16 | Number of Reefs | 2 Reefs 1, Luff
1.80m
2, Luff
3.80m
|
HELP |
| M17 | Intermediate Reefing Diamond Eyes (Yes or No) |
No |
HELP |
| M18 | Foot Reefing Grommets (next to boom) | N/A |
HELP |
| M19 | Reefing Ring Type | Webbed Low Friction Ring at the
Reef Clew and at the Reef Tack Reef #1 - STARBOARD - Luff 1.80m Reef #2 - PORT - Luff 3.80mm |
HELP |
| M20 | Luff Length (Max Hoist - P) | 11.54m Max (Net Finished size day of Delivery) |
HELP |
| M21 | Foot Length (Max Foot - E) | 3.95m Max (Net Finished size day of Delivery) |
HELP |
| M22 |
Leech Length (straight line
head to clew) |
Sailmaker |
HELP |
| M23 |
Bimini to Clear (yes or no) |
HELP | |
| M24 |
Foot Round |
Sailmaker |
|
| M25 |
Aspect Ratio |
Sailmaker |
HELP |
| M26 | Vessel Backstay Measurement | 4.60m | HELP |
| M27 | Luff Slides (Part Number) | A007 | HELP |
| M28 | Foot Slides (Part Number) | Loose Footed |
HELP |
| M29 | Roach Type | Cruise |
HELP |
| M30 | Roach Factor | 1.09 |
HELP |
| M31 | MGM | Sailmaker |
HELP |
| M32 | MGU | Sailmaker |
HELP |
| M33 | Batten Type (Partial or Full) | 3 partial Battens and 1 Rutgerson Full Batten Holder with wheeled Slider 1530-11-XX for the upper Batten | HELP |
| M34 |
Include Battens |
YES |
|
| M35 | Install Nylon Batten Holders | N/A |
HELP |
| M36 | Intermediate Sliders | 7 intermediate Sliders A007 ; 1 B309 at the Head ; 1 wheeled Slider for the upper Batten | HELP |
| M37 | Cloth Weight | WCXi - M7.5oz - GREY |
|
| M38 | Cut Type | Radial |
|
| M39 | Sail Area | Sailmaker |
|
| M40 | Cunningham | Cunningham : Webbed low
friction Ring on Port Cunningham Luff 0.30m |
HELP |
| M41 | Telltails | Yes |
HELP |
| M42 | Triple Stitch | Yes |
|
| M43 | Sail Logo and Color(red, blue or black) | No |
HELP |
| M44 | Sail Logo Artwork | N/A |
|
| M45 | Sail Numbers and Color | No |
HELP |
| M46 | Draft Stripe and Color(red, blue or black) | Yes (RED) |
HELP |
| M47 |
Overhead Leech Line |
No |
|
| M48 |
Specialty Sail |
No |
HELP |
| M49 |
Boom Cover |
No |
HELP |
| M50 |
Lazy Bag |
No |
HELP |
| - Headsail - 8001029
Antoine |
|||
| H0 |
Sail Layout |
Layout
v3 |
|
| H1 | Size of Headsail (110, 135, 150 etc.)" | Luff Foot |
HELP |
| H2 | Luff Length, Max Hoist, B measurement | 8.50m(Max) (Net Finished size day of delivery) |
HELP |
| H3 | Leech Length | sailmaker | HELP |
| H4 | Foot Length | 3.25m |
HELP |
| H5 | Tack and Head Fittings | Tack webbed O-Ring ; Head webbing Loop (Look at the attached Photos) | |
| H6 | Clew Type (Press ring or 0-Ring) | O-Ring | HELP |
| H7 |
Leech Line |
Yes |
|
| H8 |
Reefs for Hank on Sail (specify Qty of
tiedowns) |
No Manual Reefs |
|
| H9 |
Foot Line |
Yes |
|
| H10 | Track 1 (Tack to Genoa Track Beginning) | 4.80m |
HELP |
| H11 | Track 2 (Tack to Genoa Track Ending) | 5.30m |
HELP |
| H12 | Vessel "I" Measurement | 11.29m |
HELP |
| H13 | Vessel "J" Measurement | 3.30m |
HELP |
| H14 |
Calculated Forestay Length |
Sailmaker |
|
| H15 | Reef | N/A |
|
| H16 | LP | 3.00m |
HELP |
| H17 | Color of Suncover | N/A |
HELP |
| H18 | Side of Sail for Suncover (port or Stbd) | N/A | |
| H19 | Luff Tape Size (such as #6) | Piston Hanks #2 max wire size
15/32'' Hanks 100cm spacing |
HELP |
| H20 | Furler Manufacturer | N/A |
|
| H21 | Foam Luff | N/A | HELP |
| H22 | Cut Type | Radial |
|
| H23 | Sail Area | Sailmaker |
|
| H24 | Telltails | Yes | HELP |
| H25 | Telltail Window | No |
|
| H26 | Triple Stitch | YES | |
| H27 | Logo | No |
HELP |
| H28 | Cloth Weight | WCXi - M7.5oz - GREY |
|
| H29 | Sail Numbers and Color (red, blue or black) | No |
HELP |
| H30 | Sheeting Stripe (red, blue, black) | No |
HELP |
| H31 | Draft Stripe Color (red, blue or black) | Yes (RED) |
HELP |
| H32 | Clew Height off Deck | ~50cm | HELP |
| H33 | Tack Height off Deck | 10cm | HELP |
| H34 |
Luff tape or Piston Hanks
starts 100cm up
from Tack |
100cm The first Hank must be 100 cm from the deck and the Hank spacing must be 100cm. |
HELP |
| H35 |
Specialty Sail |
No |
HELP |
| Customer Note: All details we can check as
sailmakers are based on accurate vessel I and J
Measurements |
HELP |
