| Deposit Recv'd |
Measurements Complete |
Layouts Requested |
Layouts Posted |
Waiting for Approval |
Layouts Approved |
Order in Production |
Order Completed |
Customer Advised |
Order Shipped |
| XXXXX |
How to Use This Web Based Order Form
jaapschellekens@gmail.com==== CUSTOMER SHIPPING INFORMATION ===
First Name :
Last Name :
Address :
City :
State/Province :
Zip/Postal Code :
Country :
|
|
- Mainsail - Golden Hind 31 |
8000903 Jaap |
|
|
M0 |
Sail Layout |
|
|
|
M1 |
Tack Cut Back (Aft face of Mast to
center of tack Pin - A) |
A = 5.5 cm |
|
|
M2 |
Tack Cut Up (Top of Boom to Center
of tack Pin - B) |
B = 0.0 cm |
|
|
M3 |
Clew Cut Up (Top of Boom to Center
of Tack Pin - X) |
Loose Footed |
|
|
M4 |
Clew type (slug, outhaul car or
ring with strap) |
outhaul car |
|
|
M5 |
Sunbrella clew cover for Furling
Mains |
na |
|
|
M6 |
Other Offsets |
Aft face of mast to backstay at
boom level = 550 cm |
|
|
M7 |
Headboard |
Yes (Current headboard = 11.5 cm
wide at the top) |
|
|
M8 |
Leech Line |
yes |
|
|
M9 |
Foot Line |
No |
|
|
M10 |
Tack Ring Type |
Current sail has a tack press ring |
|
|
M11 |
Tack angle |
See leech length. Angle is
important as the boom rests on a beam (see photo) |
|
|
M12 |
Jack Line |
No |
|
|
M13 |
Mast Bend (Luff Round) |
Std |
|
|
M14 |
Fractional Rig (Yes, No) |
No |
|
|
M15 |
Mast - Keel or Deck Stepped? |
Deck stepped |
|
|
M16 |
Number of Reefs |
3 Reefs Current reef points are (measured
from edge of sail at tack): 1 = 85cm 2 = 170 cm 3 = 260 cm |
|
|
M17 |
Intermediate Reefing Diamond Eyes
(Yes or No) |
YES |
|
|
M18 |
Foot Reefing Grommets (next to
boom) |
N/A |
|
|
M19 |
Reefing Ring Type |
Floppy Reefing rings #3, 10cm
length |
|
|
M20 |
Luff Length (Max Hoist - P) |
Black line near top of mast
(Approx 8 inch) to top of boom 850 cm |
|
|
M21 |
Foot Length (Max Foot - E) |
measured from black line on boom
to face of mast Max 460 cm |
|
|
M22 |
Leech Length (straight line head
to clew) |
Sailmaker
NET 9.15m |
|
|
M23 |
Bimini to Clear (yes or no) |
Yes, dodger and boom gallows |
|
|
M24 |
Foot Round |
Sailmaker |
|
|
M25 |
Aspect Ratio |
About 2, yes it is a very fat sail
due to the short mast |
|
|
M26 |
Vessel Backstay Measurement |
Aft face of mast to backstay at
boom level = 550 cm |
|
|
M27 |
Luff Slides (Part Number) |
base of slider length = 30mm, with
= 16mm I think this is a A007 |
|
|
M28 |
Foot Slides (Part Number) |
Loose Footed |
|
|
M29 |
Roach Type |
Max with in the back Stay |
|
|
M30 |
Roach Factor |
Max with in the back Stay |
|
|
M31 |
MGM |
Sailmaker (The mast has little to
no bend) |
|
|
M32 |
MGU |
Sailmaker |
|
|
M33 |
Batten Type (Partial or Full) |
1 Full |
|
|
M34 |
Include Battens |
YES |
|
|
M35 |
Install Nylon Batten Holders |
YES |
|
|
M36 |
Intermediate Sliders |
YES Total current number of sliders on
sail is 12 which just fits |
|
|
M37 |
Cloth Weight |
7.88 Fastnet |
|
|
M38 |
Cut Type |
Cross |
|
|
M39 |
Sail Area |
Sailmaker |
|
|
M40 |
Cunningham |
Yes |
|
|
M41 |
Telltails |
Yes |
|
|
M42 |
Triple Stitch |
Yes |
|
|
M43 |
Sail Logo and Color(red, blue or
black) |
No |
|
|
M44 |
Sail Logo Artwork |
N/A |
|
|
M45 |
Sail Numbers and Color |
YES GH In black |
|
|
M46 |
Draft Stripe and Color(red, blue
or black) |
Yes BLACK |
|
|
M47 |
Overhead Leech Line |
No |
|
|
M48 |
Dutchman Eyelets |
YES - the vertical columns of eyelets should be at 1m, 2m and 3m from the luff - the horizontal rows need
to be aligned with the luff slides and need
11 eyelets for the first column (1m from the
luff), 7 eyelets in the second column and (2m from
the luff) three eyelets in the third column (3m
from the luff). The horizontal row need to be aligned
with the boom (straight line from clew to tack)
|
|
|
M49 |
Boom Cover |
No |
|
|
M50 |
Lazy Bag |
No |
—-----------------------------------
