Deposit Recv'd |
Measurements Complete |
Layouts Requested |
Layouts Posted |
Waiting for Approval |
Layouts Approved |
Order in Production |
Order Completed |
Customer Advised |
Order Shipped |
XXXXX |
How to Use This Web Based Order Form
peter@peterthornbuilders.com==== CUSTOMER SHIPPING INFORMATION ===
First Name :
Last Name :
Address :
City :
State/Province :
Zip/Postal Code :
Country :
- Headsail - |
8000231 Peter |
||
H0 |
Sail Layout |
Layout
v4 |
|
H1 | Size of Headsail (110, 135, 150 etc.)" | Deck Sweeper 163 Deck Sweeper |
HELP |
H2 | Luff Length, Max Hoist, B measurement | 11.2776m |
HELP |
H3 | Leech Length | 11.3092m | HELP |
H4 | Foot Length | 6.563m |
HELP |
H5 | Tack and Head Fittings | Webbing Loops |
|
H6 | Clew Type (Press ring or 0-Ring) | Webbed O-Ring |
HELP |
H7 |
Leech Line |
Yes Aluminum Clam Cleat above the clew on the STARBOARD side to be easily adjustable on downwind starboard tack |
|
H8 |
Reefs for Hank on Sail (specify Qty of
tiedowns) |
No Manual Reefs |
|
H9 |
Foot Line |
YES - Foot line Aluminum Clam Cleat aft of
tack on the PORT side to be easily adjustable on downwind
starboard tack. |
|
H10 | Track 1 (Tack to Genoa Track Beginning) | 18.16ft | HELP |
H11 | Track 2 (Tack to Genoa Track Ending) | 22.96ft Note: the closest sheeting angle for a high LP headsail is as far aft as possible. I want the sail to be designed to sheet to this point when fully unfurled. |
HELP |
H12 | Vessel "I" Measurement | 39.00ft |
HELP |
H13 | Vessel "J" Measurement | 12.667ft | HELP |
H14 |
Calculated Forestay Length |
Sailmaker |
|
H15 | Reef | N/A |
|
H16 | LP | Sailmaker |
HELP |
H17 | Color of Suncover | N/A |
HELP |
H18 | Side of Sail for Suncover (port or Stbd) | N/A | |
H19 | Luff Tape Size (such as #6) | 5.5mm |
HELP |
H20 | Furler Manufacturer | Harken Mark 4 |
|
H21 | Foam Luff | Yes |
HELP |
H22 | Cut Type | Tri Radial |
|
H23 | Sail Area | Sailmaker |
|
H24 | Telltails | Yes Three vertical columns of two telltales in each column. The foremost column is 18" aft of the luff and 8" below each of the two lower draft stripes. The aftmost column is to be 18" aft of the 125 furling dot and also 8" below the two lower draft stripes. The middle vertical column is to be halfway between the foremost and aftmost telltales. |
HELP |
H25 | Window | YES Panels 1b/8, 1b/9, and 1b/10 shall be made of window material |
|
H26 | Triple Stitch | YES | |
H27 | Logo | No |
HELP |
H28 | Cloth Weight | DP: PX10 Black (PX15 on leech)- Tri Radial Note: H28 DP PXB15 on two aftmost leech panels AND two lowest foot panels. FOOT 1/12, 1/11, 1b/12, and 1b/11 LEECH 1b/1, 1b/2, 2b/5, 2b/4, 3/6, and 3/5 |
|
H29 | Sail Numbers and Color (red, blue or black) | N/A |
HELP |
H30 | Sheeting Stripe (red, blue, black) | YES BLUE, like draft stripes. This should run upwards from the clew toward the direction of the 50% luff. 6' long. |
HELP |
H31 | Draft Stripe Color (red, blue or black) | Yes (Blue) |
HELP |
H32 | Clew Height off Deck | sailmaker |
HELP |
H33 | Tack Height off Deck | 14.5in | HELP |
H34 |
Luff tape starts 32in up
from Tack |
32in | HELP |
H35 |
Furling Dots |
Three BLUE dots along the foot. One
at 125 LP. Two more spaced equally between the 125LP dot and the luff. A RED furling dot is to be placed along the foot at 110LP. |
HELP |
Spreader Patch |
Block spreader patch material is to be
applied to both sides of the sail, and it is precisely
located on the drawing |
HELP |