| Deposit Recv'd |
Measurements Complete |
Layouts Requested |
Layouts Posted |
Waiting for Approval |
Layouts Approved |
Order in Production |
Order Completed |
Customer Advised |
Order Shipped |
| XXXXX |
How to Use This Web Based Order Form
stiggp@online.no==== CUSTOMER SHIPPING INFORMATION ===
First Name :
Last Name :
Address :
City :
State/Province :
Zip/Postal Code :
Country :
| - Headsail - |
7001013 Stig |
||
| H0 |
Sail Layout |
Layout
v1 |
|
| H1 | Size of Headsail (110, 135, 150 etc.)" | Luff, Leech and Foot The lengths do not include webbing loops at the tack, top and clew. If these loops are of any significant length, care must be taken, so the sail’s luff length i not taken as the length between the attachment shackles, but the sail corners. |
HELP |
| H2 | Luff Length, Max Hoist, B measurement | 12.70m webbing loop tip to webbing loop tip (Max) (Sailmaker Net Finished size day of delivery) |
HELP |
| H3 | Leech Length | 11.55m | HELP |
| H4 | Foot Length | 4.20m |
HELP |
| H5 | Tack and Head Fittings | Webbing Loops |
|
| H6 | Clew Type (Press ring or 0-Ring) | O-Ring |
HELP |
| H7 |
Leech Line |
Yes |
|
| H8 |
Reefs for Hank on Sail (specify Qty of
tiedowns) |
No Manual Reefs |
|
| H9 |
Foot Line |
Yes |
|
| H10 | Track 1 (Tack to Genoa Track Beginning) | N/A |
HELP |
| H11 | Track 2 (Tack to Genoa Track Ending) | N/A | HELP |
| H12 | Vessel "I" Measurement | 14.62m |
HELP |
| H13 | Vessel "J" Measurement | 3.99m |
HELP |
| H14 |
Calculated Forestay Length |
N/A |
|
| H15 | Reef | YES Webbing on tack luff and Leech - See picture 1.An additional tack at the luff and an additional clew at the leech for reefing about 2m above the foot. These points should be made as webbing loops, (similar to the tack used when the sail is not reefed), with adequate enforcement in the cloth. See attachment. 2.Three small webbing loops approximately in line on each side of the sail between the additional tack and clew mentioned above, approximately evenly spaced and each with appropriate enforcement. The purpose is to be able to tie up the depowered cloth by tying strings, when the sail is reefed by the additional tack and clew. There should be no grommets or any other metal parts used for this purpose, and the sail cloth should not be pierced. See attachment. |
|
| H16 | LP | Sailmaker |
HELP |
| H17 | Color of Suncover | Charcoal |
HELP |
| H18 | Side of Sail for Suncover (port or Stbd) | STBD | |
| H19 | Luff Tape Size (such as #6) | 5mm Finished Also Need: Grommets along the luff, interspaced at about 1m, for latching the sail to the forestay as alternative attachment method independent of using the luff profile grove. (To comply with World Sailing Special Regulations (4.27.3 b) for heavy weather sail.) |
HELP |
| H20 | Furler Manufacturer | Facnor Flat Deck FD 190 |
|
| H21 | Foam Luff | NO |
HELP |
| H22 | Cut Type | Polyester Membrane with DP Lite Skin - Grey -
(20.000dpi) - Heavy |
|
| H23 | Sail Area | Sailmaker |
|
| H24 | Telltails | Yes | HELP |
| H25 | Telltail Window | No |
|
| H26 | Triple Stitch | YES | |
| H27 | Logo | No |
HELP |
| H28 | Cloth Weight | Polyester Membrane with DP Lite Skin - Grey -
(20.000dpi) - Heavy |
|
| H29 | Sail Numbers and Color (red, blue or black) | No |
HELP |
| H30 | Sheeting Stripe (red, blue, black) | No |
HELP |
| H31 | Draft Stripe Color (red, blue or black) | Yes (BLUE) |
HELP |
| H32 | Clew Height off Deck | sailmaker |
HELP |
| H33 | Tack Height off Deck | 230mm |
HELP |
| H34 |
Luff tape starts 50mm up
from Tack |
50mm |
HELP |
| H35 |
Specialty Sail |
No |
HELP |
| Customer Note: All details we can check as
sailmakers are based on accurate vessel I and J
Measurements |
HELP |
Here is additional information which should be
included in the order as necessary:
a.
The furler is a Facnor Flat Deck FD 190
with a luff profiles R24. I believe 5mm luff tape (#6) is
recommended.
b.
The distance (perpendicular to the head stay)
from the tackpoint on the furler drum to the profile’s
luff tape grove ) is 5 cm.
c.
Distance from tack to lower end of luff tape (bolt rope) should be more than 50cm but less than 70cm. Hence 60 cm may be suitable.
d.
Grommets or similar along the luff, interspaced at about 1m, for latching the sail to the forestay as alternative attachment method independent of using the luff profile grove. (To comply with World Sailing
Special Regulations (4.27.3 b) for heavy weather sail.)
e.
Additional tack and clew points for reefing
about 2m above the foot. The points should be made as
webbing loops (no metal rings/dog bones), with adequate enforcements in the cloth.
f.
Three small webbing loops in line between the reefed tack and clew on both sides of the sail, to facilitate lacing the depowered cloth
area together when reefed. No grommets or holes to
be made in the cloth for this purpose.
g.
Foam in luff seems unnecessary (?) as reefing
by furling will not be used.
h.
UV protection color matching the gray
Lite Skin Cloth.
