3000403 Glen

Order Number : 3000403 Glen
Vessel : Custom built - Steel Hull

Deposit Recv'd	Measurements Complete	Layouts Requested	Layouts Posted	Waiting for Approval	Layouts Approved	Order in Production	Order Completed	Customer Advised	Order Shipped
XXXXX									Invoice

Special Shipping Instructions : None

Sail as Quoted to Customer:

>
>     Performance Mainsail
>     13.93oz Challenge Performance Sailcloth
>     2 Reefs
>     No Battens
>     Luff - grommets
>     Gaff grommets
>     Draft Stripe, Telltails, Triple Stitched
>     Sailbag
>     Luff=10.5m leech=15m gaff=7m foot=8.5m
>     Leech hollow - please confirm
>     Sail Area 92 m2 (sail plan) - cross cut
>
>
>
>     Performance Mizzen
>     13.93oz Challenge Performance Sailcloth
>     1 Reef
>     No Battens
>     Luff - grommets
>     Gaff grommets
>     Draft Stripe, Telltails, Triple Stitched
>     Sailbag
>     Luff=6.3m leech=10.5m gaff=5.2m foot=7m
>     Leech hollow - please confirm
>     Sail Area 55 m2 (sail plan) - cross cut

How to Use This Web Based Order Form

Customer Information

=== CUSTOMER BILLING INFORMATION ===

Transaction ID: 6BX00532L62693014

glen knight

glen@rimnativa.com

680-776-6397

==== CUSTOMER SHIPPING INFORMATION ===

glen knight

Royal Belau Yacht Club

Sam's Tours

Koror,Palau

96940

Palau

Quote Number :316993863.TXT
ID :132496921.TXT

Sail Specifications

Layout R1

Note;

Throat Press Ring to be centered 38cm from Luff and so shown on layout. Top
of ring just below sails Gaff Edge.


es, please make the luff 10.5 meters, finished and the leech, 15 meters, finished.

	37 Meter Steel Vessel - Mainsail - 6001106 Glen
M1	Tack Cut Back (Aft face of Mast to center of tack Pin - A)	37cm	HELP
M2	Tack Cut Up (Top of Boom to Center of tack Pin - B)	0	HELP
M3	Clew Cut Up (Top of Boom to Center of Tack Pin - X)	N/A	HELP
M4	Clew type (slug, outhaul car or ring with strap)	Press Ring	HELP
M5	Subrella clew cover for Furling Mains	na	HELP
M6	Other Offsets		HELP
M7	Headboard	No	HELP
M8	Leech Line	yes
M9	Tack Ring Type	Press Ring	HELP
M10	Tack angle	90
M11	Jack Line	No	HELP
M12	Mast Bend (Luff Round)	Std	HELP
M13	Fractional Rig (Yes, No)"	No	HELP
M14	Number of Reefs	2 Reefs
M15	Intermediate Reefing Diamond Eyes	Yes	HELP
M16	Foot Reefing Grommets (next to boom)		HELP
M17	Reefing Ring Type	Grommet Through Sail	HELP
M18	Luff Length (Max Hoist - P)	10.7m (Max)	HELP
M19	Foot Length (Max Foot - E)	8.5m (Max)
M20	Leech Length (straight line head to clew)	16m (Max)
	Gaff	7.0m (Max)
	Foot Cut Round	Sailmaker
	Aspect Ratio		HELP
M21	Vessel Backstay Measurement	N/A	HELP
M22	Luff Slides (Part Number)	Lacing Grommets	HELP
M23	Foot Slides (Part Number)	Loose	HELP
	Gaff	Lacing Grommets
M24	Roach Type	Leech Hollow	HELP
M25	Roach Factor	N/A	HELP
M26	MGM	Sailmaker	HELP
M27	MGU	Sailmaker	HELP
M28	Batten Type (Partial or Full)	No Battens	HELP
M29	Install Nylon Batten Holders	N/A	HELP
M30	Intermediate Sliders	N/A
M31	Cloth Weight	13.93
M32	Cut Type	Cross
M33	Sail Area	92 sqm
M34	Cunningham	No	HELP
M35	Telltails	Yes	HELP
M36	Triple Stitch	Yes
M37	Sail Logo and Color(red, blue or black)	No	HELP
M38	Sail Logo Artwork	N/A
M39	Sail Numbers and Color	No	HELP
M40	Draft Stripe and Color(red, blue or black)	No	HELP

Layout R1

Note;

Throat Press Ring to be centered 38cm from Luff and so shown on layout. Top
of ring just below sails Gaff Edge.

	37 Meter Steel Vessel - Mizzen - 6001106 Glen
M1	Tack Cut Back (Aft face of Mast to center of tack Pin - A)	37cm	HELP
M2	Tack Cut Up (Top of Boom to Center of tack Pin - B)	0	HELP
M3	Clew Cut Up (Top of Boom to Center of Tack Pin - X)	N/A	HELP
M4	Clew type (slug, outhaul car or ring with strap)	Press Ring	HELP
M5	Subrella clew cover for Furling Mains	na	HELP
M6	Other Offsets		HELP
M7	Headboard	No	HELP
M8	Leech Line	yes
M9	Tack Ring Type	Press Ring	HELP
M10	Tack angle	90
M11	Jack Line	No	HELP
M12	Mast Bend (Luff Round)	Std	HELP
M13	Fractional Rig (Yes, No)"	No	HELP
M14	Number of Reefs	1 Reefs
M15	Intermediate Reefing Diamond Eyes	Yes	HELP
M16	Foot Reefing Grommets (next to boom)		HELP
M17	Reefing Ring Type	Grommet Through Sail	HELP
M18	Luff Length (Max Hoist - P)	6.0m (Max)	HELP
M19	Foot Length (Max Foot - E)	7.0m (Max)
M20	Leech Length (straight line head to clew)	10.2m (Max)
	Gaff	5.0m (Max)
	Foot Cut Round	Sailmaker
	Aspect Ratio	N/A	HELP
M21	Vessel Backstay Measurement	N/A	HELP
M22	Luff Slides (Part Number)	Lacing Grommets	HELP
M23	Foot Slides (Part Number)	Loose	HELP
	Gaff	Lacing Grommets
M24	Roach Type	Leech Hollow	HELP
M25	Roach Factor	N/A	HELP
M26	MGM	Sailmaker	HELP
M27	MGU	Sailmaker	HELP
M28	Batten Type (Partial or Full)	No Battens	HELP
M29	Install Nylon Batten Holders	N/A	HELP
M30	Intermediate Sliders	N/A
M31	Cloth Weight	13.93
M32	Cut Type	Cross
M33	Sail Area	Sailmaker
M34	Cunningham	No	HELP
M35	Telltails	Yes	HELP
M36	Triple Stitch	Yes
M37	Sail Logo and Color(red, blue or black)	No	HELP
M38	Sail Logo Artwork	N/A
M39	Sail Numbers and Color	No	HELP
M40	Draft Stripe and Color(red, blue or black)	No	HELP

Change History

Helpful Links

Mainsail Design Notes

Boom Cover Layout

Lazy Bag Layout

Boom Details

Furler Luff Measurements

Full Batten Options

Sail Shipping Information

Speed Post Tracking Service

FED-X Tracking Service

https://www.ups.com/tracking/tracking.html

http://www.dhl.com/en.html

File Number 924665.txt

Version 8.0