| Deposit Recv'd |
Measurements Complete |
Layouts Requested |
Layouts Posted |
Waiting for Approval |
Layouts Approved |
Order in Production |
Order Completed |
Customer Advised |
Order Shipped |
| XXXXX |
Invoice |
How to Use This Web Based Order Form
Transaction ID:==== CUSTOMER SHIPPING INFORMATION ===
4KP62317FY2099220
debra anderson
debandpa@bigpond.net.au
+61 95465408
pjand54@gmail.com
| Bavaria 44 - Mainsail - |
Layout
R1 |
||
| M1 | Tack Cut Back (Aft face of Mast to center of tack Pin - A) | 50mm |
HELP |
| M2 | Tack Cut Up (Top of Boom to Center of tack Pin - B) | 50mm |
HELP |
| M3 | Clew Cut Up (Top of Boom to Center of Tack Pin - X) | 38mm |
HELP |
| M4 | Clew type (slug, outhaul car or ring with strap) | Clew Press Ring |
HELP |
| M5 | Subrella clew cover for Furling Mains | na | HELP |
| M6 | Other Offsets | |
HELP |
| M7 | Headboard | Yes | HELP |
| M8 | Leech Line | yes | |
| M9 | Tack Ring Type | Press Ring |
HELP |
| M10 | Tack angle | 88.5 | |
| M11 | Jack Line | No | HELP |
| M12 | Mast Bend (Luff Round) | Std |
HELP |
| M13 | Fractional Rig (Yes, No)" | Yes |
HELP |
| M14 | Number of Reefs | 3 Reefs |
|
| M15 | Intermediate Reefing Diamond Eyes | Yes |
HELP |
| M16 | Foot Reefing Grommets (next to boom) | No |
HELP |
| M17 | Reefing Ring Type | Floppy Reefing Reef 1starboard side reef 2 on portside reef 3 on starboard Floppy reef rings must be 150mm from front edge of bolt rope to centre of reef ring 2.5 inchs |
HELP |
| M18 | Luff Length (Max Hoist - P) | 15.1m (Max) 14.87m NET |
HELP |
| M19 | Foot Length (Max Foot - E) | 5.59m(Max) 5.51m NET |
|
| M20 |
Leech Length (straight line
head to clew) |
Sailmaker |
|
| Foot Cut Round |
Sailmaker |
||
| Aspect Ratio |
2.7 |
HELP | |
| M21 | Vessel Backstay Measurement | 6.65 |
HELP |
| M22 | Luff Slides (Part Number) | Full Battens Need too supply webbing Extra reinforcing on luff grommets. Half moon patches |
HELP |
| M23 | Foot Slides (Part Number) | Loose |
HELP |
| M24 | Roach Type | Cruiser |
HELP |
| M25 | Roach Factor | RF110 |
HELP |
| M26 | MGM | Sailmaker |
HELP |
| M27 | MGU | Sailmaker |
HELP |
| M28 | Batten Type (Partial or Full) | 4 Full chafe webbing on the battens pockets Battern 1 webbing to be 1.2mtrs long Battern 2 webbing to be 1.6mtr long
Battern 3 webbing to be 1.6mtr long.
Double nylon reinforcing on batten pocket leech ends. Half moon patches |
HELP |
| M29 | Install Nylon Batten Holders | YES |
HELP |
| M30 | Intermediate Sliders | YES 1 between each batten Just eyelets Half moon patches Need too supply webbing |
|
| M31 | Cloth Weight | 9.3 |
|
| M32 | Cut Type | Cross |
|
| M33 | Sail Area | Sailmaker Advise |
|
| M34 | Cunningham | YES |
HELP |
| M35 | Telltails | Yes |
HELP |
| M36 | Triple Stitch | Yes |
|
| M37 | Sail Logo and Color(red, blue or black) | No |
HELP |
| M38 | Sail Logo Artwork | N/A |
|
| M39 | Sail Numbers and Color | No |
HELP |
| M40 | Draft Stripe and Color(red, blue or black) | Yes (Blue) |
HELP |
