Order Number : 1001009 Jordan
Vessel       :  Catana 48

Deposit
Recv'd
Measurements
Complete
Layouts
Requested
Layouts
Posted
Waiting for
Approval
Layouts
Approved
Order in
Production
Order
Completed
Customer
Advised
Order
Shipped
XXXXX








Invoice
 

Special Shipping Instructions : None

Sail as Quoted to Customer:


 >     Performance Mainsail
 >     3 Reefs
 >     5 Full Battens Pockets + protection
 >     5 Client will send batten holders
 >     2  Mast rake/1/2 profile for
 >     Draft Stripe, Telltails, Triple Stitched
 >     Sailbag
 >     Aluminum Headboard, Leech line, Cam Cleat
 >     Radial Patches Head, Clew and Tack
 >     Sail Slides or slugs included
 >     Full CAT Roach 1.35 (135%)
 >     Sail Area : 76m2
 >     10.88oz high-mass


CHANGE

Quote 1: 10.53 (low aspect) High Modulus with 2ply on leech, with blue water specs and dyneema on batten pockets.
How to Use This Web Based Order Form

                

Customer Information

=== CUSTOMER BILLING INFORMATION ===



Transaction ID:
7GL77695PF588162P

Jordan Leigh

leigh.jy@gmail.com

512-589-4974

Phone : leigh.jy@gmail.com
E-Mail : 512-589-4974



==== CUSTOMER SHIPPING INFORMATION ===


Argentina

????


Quote Number       :316555563.TXT
ID                 :132254621.TXT



Sail Specifications

x
x





 - Mainsail -
1001009 Jordan

M0
Sail Layout
Layout R4

Sandy Layout

M1 Tack Cut Back (Aft face of Mast to center of tack Pin - A) 118mm HELP
M2 Tack Cut Up (Top of Boom to Center of tack Pin - B) 38mm

HELP
M3 Clew Cut Up (Top of Boom to Center of Tack Pin - X) 90mm
HELP
M4 Clew type (slug, outhaul car or ring with strap) O ring

Clew Jaw Width: 22mm


HELP
M5 Sunbrella clew cover for Furling Mains na HELP
M6 Other Offsets
HELP
M7 Headboard YES

Head Jaw Cut Back (center of pin): 117mm
HELP
M8 Leech Line yes
M9
Foot Line
No

M10 Tack Ring Type Tack Jaw Width: 22mm

O ring

HELP
M11 Tack angle Luff Leech and Foot
HELP
M12 Jack Line No HELP
M13 Mast Bend (Luff Round) I measured the mast bend. With a line between head and tack (but against the mast), the maximum distance of bend is 6.4cm. The max occurs at at point 42% up from the tack fitting.

Pre bend 6.4cm or 60mm

See picture
HELP
M13B
Mast Rake
2  Mast rake
1/2 profile

M14 Fractional Rig (Yes, No) No
HELP
M15
Mast - Keel or Deck Stepped?
Deck

M16 Number of Reefs 3  Reefs


I'd like to move the 3rd reef point up, to halfway between the 3rd batten (from the bottom) and the next intermediate car. See attached picture.

(This is for car stack issue)


See picture
HELP
M17 Intermediate Reefing Diamond Eyes (Yes or No)
No
HELP
M18 Foot Reefing Grommets (next to boom) N/A
HELP
M19 Reefing Ring Type floppy rings
20cm

HELP
M20 Luff Length (Max Hoist - P) 17.16m  Max

Net Saildesiger
HELP
M21 Foot Length (Max Foot - E) 6.18m  Max

Net Saildesiger
HELP
M22
Leech Length (straight line head to clew)
18.01m

Net Saildesiger
HELP
M23
Bimini to Clear (yes or no)

HELP
M24
Foot Round
Sailmaker

M25
Aspect Ratio
Sailmaker HELP
M26 Vessel Backstay Measurement N/A
HELP
M27 Luff Slides (Part Number)

the distance between the edge of the luff and the batten holder is 19mm

Distance from mast to bolt rope is 50cm

Mast to SDA batten 69mm

See picture


Client will install the SDA holders.

Leave Space to fit the SDA holders:

A4162 (top 2)
Fitting Dimensions    80mm x 50mm MM

A4202 (bottom 3)
Fitting Dimensions
100 x 50 MM



Velcro on leech
HELP
M28 Foot Slides (Part Number) Loose Footed
HELP
M29 Roach Type CAT
HELP
M30 Roach Factor 1.35
HELP
M31 MGM Sailmaker
HELP
M32 MGU Sailmaker
HELP
M33 Batten Type (Partial or Full)

See picture

the distance between the edge of the luff and the batten holder is 19mm

Distance from mast to bolt rope is 50cm

Mast to SDA batten 69mm

5 Full with dyneema protection all battens.


-------------

Top 2 Battens (16mm battens)

4 Bolts, Rod Diameter = 16mm
-------------
 Bottom 3 Battens (19mm battens)

8 Bolts, Rod diameter =  19mm

Follow the sail design

HELP
M34
Include Battens
No

M35 Install Nylon Batten Holders No


See picture

the distance between the edge of the luff and the batten holder is 19mm

Distance from mast to bolt rope is 50cm

Mast to SDA batten holder 69mm


Client will install the thier own SDA holders.


Leave Space to fit the SDA holders:

A4162 (top 2)
Fitting Dimensions    80mm x 50mm MM

A4202 (bottom 3)
Fitting Dimensions
100 x 50 MM

Velcro on leech
HELP
M36 Intermediate Sliders 6 Intermediate slides

18mm webbing

With webbing loops.

(car cutback) = 54mm

(webbing loop cut back)
35mm

See picture

HELP
M37 Cloth Weight
10.53 (low aspect) High Modulus

M38 Cut Type Cross

M39 Sail Area Sailmaker

M40 Cunningham No
HELP
M41 Telltails Yes
HELP
M42 Triple Stitch Yes

M43 Sail Logo and Color(red, blue or black) No
HELP
M44 Sail Logo Artwork N/A

M45 Sail Numbers and Color No
HELP
M46 Draft Stripe and Color(red, blue or black) Yes (Black)

3 Draft Stripe
HELP
M47
Overhead Leech Line
No

M48
Specialty Sail
YES
HELP
M49
Leech 2 ply
YES
HELP
M50
Blue Water Finish
YES
HELP



x
x





Change History









Helpful Links



Mainsail Design Notes

Boom Cover Layout

Lazy Bag Layout

Boom Details

Furler Luff Measurements

Full Batten Options




Sail Shipping Information








Speed Post Tracking Service

FED-X Tracking Service

https://www.ups.com/tracking/tracking.html

http://www.dhl.com/en.html





File Number  924665.txt
          
     
Version 8.0